一、仿威圖機柜的核心優勢：細節之處見真章

1、 The core advantage of the imitation Weitu cabinet: see the real chapter for details

這種機柜的設計融合了實用性和耐用性，從外到內都體現著對設備保護的用心：

The design of this cabinet combines practicality and durability, reflecting the care for equipment protection from the outside to the inside:

1.外觀與結構設計

1. Appearance and structural design

機柜的外殼采用厚度均勻的金屬板材，表面經過靜電噴涂處理，形成一層堅固的防護層，既能抵抗碰撞刮擦，又能有效防銹。柜門采用多道密封膠條設計，關閉時緊密貼合柜體，配合隱藏式的鎖具，不僅能防止灰塵、濕氣進入，還能在一定程度上隔絕噪音和電磁干擾。例如，在粉塵較多的工廠環境中，這種密封設計能讓柜內設備減少 70% 以上的積灰，延長設備使用壽命。

The outer shell of the cabinet is made of metal sheet with uniform thickness, and the surface is treated with electrostatic spraying to form a strong protective layer, which can resist collision and scratching, and effectively prevent rust. The cabinet door is designed with multiple sealing strips, which tightly adhere to the cabinet when closed. Coupled with hidden locks, it not only prevents dust and moisture from entering, but also isolates noise and electromagnetic interference to a certain extent. For example, in factory environments with high levels of dust, this sealed design can reduce over 70% of dust accumulation in cabinet equipment and extend equipment lifespan.

2.內部空間規劃

2. Internal space planning

打開柜門，會看到內部整齊排列的安裝支架和橫梁，這些支架采用標準化的孔位設計，可以靈活調節高度和間距，無論是大小不一的電源模塊、交換機，還是復雜的線路排布，都能找到合適的安裝位置。柜內還預留了充足的走線通道，讓電源線、信號線能夠有序穿過，避免雜亂纏繞導致的短路風險。某車間使用這種機柜后，設備安裝時間比傳統機柜節省了 40%，線路故障發生率下降了 60%。

Opening the cabinet door, you will see neatly arranged installation brackets and crossbeams inside. These brackets are designed with standardized hole positions, allowing for flexible adjustment of height and spacing. Whether it is power modules of different sizes, switches, or complex circuit layouts, suitable installation positions can be found. Adequate wiring channels are also reserved inside the cabinet to allow power and signal lines to pass through in an orderly manner, avoiding the risk of short circuits caused by disorderly entanglement. After using this type of cabinet in a certain workshop, the equipment installation time was saved by 40% compared to traditional cabinets, and the incidence of line failures decreased by 60%.

3.材料與工藝選擇

3. Material and process selection

根據使用環境的不同，機柜材料分為冷軋鋼板和不銹鋼兩種：冷軋鋼板成本適中，適合干燥清潔的室內環境；不銹鋼則具有更強的耐腐蝕性，在潮濕的地下室或沿海地區使用時，能有效抵御鹽分和水汽的侵蝕。無論是哪種材料，都經過嚴格的折彎、焊接工藝，確保柜體結構穩固，承重能力可達 500 公斤以上，即使裝滿重型設備，也不會出現變形或傾斜。

According to different usage environments, cabinet materials are divided into two types: cold-rolled steel plate and stainless steel: cold-rolled steel plate has a moderate cost and is suitable for dry and clean indoor environments; Stainless steel has stronger corrosion resistance and can effectively resist the erosion of salt and water vapor when used in damp basements or coastal areas. Regardless of the material, it undergoes strict bending and welding processes to ensure the stability of the cabinet structure, with a load-bearing capacity of over 500 kilograms. Even when loaded with heavy equipment, it will not deform or tilt.

二、如何選擇適合的仿威圖機柜：按需匹配是關鍵

2、 How to choose a suitable imitation Weitu cabinet: on-demand matching is key

面對市場上種類繁多的機柜，根據實際需求選擇才能物盡其用：

Faced with a wide variety of cabinets in the market, choosing according to actual needs can make the most of them:

1.尺寸選擇

1. Size selection

測量需要安裝的設備大小，包括設備的高度、寬度和深度，同時預留 20%-30% 的空間用于走線和散熱。例如，存放一臺標準 19 英寸的服務器，需要選擇寬度為 600 毫米、深度為 800 毫米的機柜，高度則根據設備數量選擇 22U、27U 等不同規格（1U 約等于 4.45 厘米）。

Firstly, measure the size of the equipment to be installed, including its height, width, and depth, while reserving 20% -30% of the space for wiring and heat dissipation. For example, to store a standard 19 inch server, a cabinet with a width of 600 millimeters and a depth of 800 millimeters needs to be selected, and different specifications such as 22U and 27U should be chosen based on the number of devices (1U is approximately 4.45 centimeters).

2.材料與防護等級

2. Materials and Protection Levels

如果設備安裝在室內干燥環境，冷軋鋼板材質的機柜足以滿足需求；若在潮濕多水的環境（如地下室、浴室附近），則應選擇不銹鋼材質，并關注防護等級（IP 等級），例如 IP54 表示防塵防水，適合戶外或潮濕場景，IP65 則能抵御強烈噴水，適合更嚴苛的環境。

If the equipment is installed in a dry indoor environment, a cabinet made of cold-rolled steel plate material is sufficient to meet the requirements; If it is in a damp and water rich environment (such as a basement or near a bathroom), stainless steel material should be selected, and attention should be paid to the protection level (IP level). For example, IP54 indicates dust and water resistance, suitable for outdoor or humid scenes, while IP65 can resist strong water spray and is suitable for more harsh environments.

3.附加功能需求

3. Additional functional requirements

根據設備散熱需求，選擇帶風扇、散熱孔或空調模塊的機柜；如果需要遠程監控柜內狀態，可選擇帶有透明觀察窗或預留傳感器安裝位的型號。此外，機柜的顏色也可根據環境搭配，常見的灰色、黑色能很好地融入工業或辦公場景。

Select cabinets with fans, heat dissipation holes, or air conditioning modules based on the cooling requirements of the equipment; If remote monitoring of the status inside the cabinet is required, models with transparent observation windows or reserved sensor installation positions can be selected. In addition, the color of the cabinet can also be matched according to the environment, and common shades of gray and black can blend well into industrial or office scenes.

本文由山東仿威圖機柜友情奉獻.更多有關的知識請點擊:http://zhekouds.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message